If you’re looking for that deep wet-look shine, this product is for you. Just like other Wipe New automotive care products, their Blazing Wet Tire Shine produces incredible results, restoring and renewing your tires with ease. It quickly brings back the deep black shine and leaves the perfect wet tire finish.
The no-sling formula makes this product really shine. Blazing Wet Tire Shine will stay right where you put it, so you don’t have to worry about product flipping up and ruining your detail job as soon as you drive off.
For a professional looking finish, start with Wipe New Fierce Tire and Wheel Cleaner. Then, dry thoroughly and apply the Blazing Wet Tire Shine to the tire sidewalls to restore and renew their deep black brilliance.
Let’s talk product info:
Fast, effective and long lasting, Wipe New’s Blazing Wet Tire Shine is the perfect finish to any vehicle detail regiment.
- Rain & car wash detergent resistant - Thanks to its special blend of synthetic polymers, this tire shine offers long lasting results that won’t just wash right off.
- Rich wet-look shine - with only one or two thin layers, it helps restore your tires' rich black shine.
- Concentrated synthetic polymer blend - long lasting, and designed specifically not to drip.
- Dries in minutes - this formula dries fast, so you don’t have to worry about dust or dirt settling on it, or having it slinging onto your body panels as you drive away.
- Any-angle spray nozzle - gives you ultimate control, allowing you to easily achieve even coverage from any angle.
- Customizable Shine - Spray and walk away for a high shine wet look, or spray and wipe for a satin shine.
What’s included:
- 1 - 15oz (425g) aerosol bottle
Important Application information:
- Ensure the tire is completely dry before beginning application. Moisture trapped underneath will not allow the product to properly penetrate the surface, and may result in an uneven appearance.
- Apply only to tire sidewalls
- Avoid the tread as the tire shine makes surfaces slippery.
- Do not apply to cycle tires.
- Apply in a well ventilated area. The vapors are harmful if inhaled, so be cautious when applying, and ensure you have proper ventilation and fresh air. Open all doors and windows if applying indoors.
- Keep out of the sun and away from any heat sources, sparks, flames, etc. since the vapors can accumulate and may ignite explosively.
- Avoid contact with glass. It will leave a smear-like film that can be difficult to remove if applied to glass, painted surfaces, wheels etc.
- Avoid overspray. Be precise with your application, this product will stain and leave a slippery surface.
- Do not spray on the wheels
- Do not get on spray tire tread, or any surfaces you do not wish to be slippery.
- Do not drive if tires are still overly wet with product. After 5 mins, wipe off any excess product with a lint free cloth.
How to apply Blazing Wet Tire Shine:
1. Ensure the tires are clean and completely dry before application
2. Shake the can vigorously
- Shake until you hear the ball rattle.
3. Spray evenly over tire sidewalls
- Avoid spraying the wheels & tire tread.
- Wipe off any overspray immediately.
4. Allow to sit on the tire for 3 to 5 minutes - Two shine options.
- Spray and walk away for a high shine wet look
- Spray and wipe with a lint free cloth for a satin shine.
5. Wipe off any excess product
- If there is still excess wet product on the tire after 5 mins, simply wipe it away with a lint free cloth.
6. Apply additional coats to deepen color and intensify shine if desired.
Pro tips:
Park over a tarp or in short grass during application.
- This product will stain cement and asphalt and leave the surface slippery. It's easier to prevent overspray from landing on unintended surfaces than to clean it up.
- If overspray does occur, immediately wipe it off and use a strong detergent to remove any staining and slippery texture from your cement and asphalt.
- If overspray gets on glass or painted surfaces, try to remove with water and detergent first, then acetone if needed.
Don't rush the process. Let it sit for the full 5 minutes. I've found it best to just be patient and let the product settle into the tire for the full 5 minutes before wiping off any excess.
You can choose between high shine and satin finish. For high shine, apply and let sit on the tire for 5 minutes; only wipe off excess product with a lint free cloth if necessary. For satin, apply and let sit for 1-2 minutes, then wipe with a lint free cloth.
Apply 2 coats for a super-intense shine. One coat looks good, but two coats look even better!